Neoprene Rubber Sheet

3MM CR Rubber Sheet
Updated:8/15/2016 8:14:17 PM Browse:630 Close window Print this page

Petrol Resistant CR Rubber Sheet

 

It is an oil resistant neoprene blended sheet reinforced with polyester fabric. It is capable of permitting relative motion between a stationary and a moving member while maintaining a separation of the two media on either side and may maintain a pressure differential between the two media. It is a smooth plate finish sheet manufactured from superior components and properties for long service life.


Neoprene Diaphragm rubbers are good for use in oils, gases, and air in gauges, meters, and valves. This material also makes for an excellent weather stripping material.

*It should be careful assessed for suitability to assure low permeability to the fluids or gases it will separate.

Available in sheets, bulk rolls, and pre-cut gaskets.

Standard Sizes

Thickness
1/16”, 1/8”, 3/16”, 1/4”

Sheet Sizes
48” width

 

SPECIFICATIONS

  • TEMPERATURE RANGE
    -20º F to +180º F
  • DUROMETER
    70 (+/-5) Shore A
  • TENSILE
    1100 PSI minimum
  • ELONGATION
    300% minimum
  • WEIGHT
    1/8" 8.5 lb/sy