Solid Silicone Rubber Sheets

Moulded Silicone Rubber
Updated:1/10/2014 1:04:22 AM Browse:3870 Close window Print this page

General silicone rubber sheet



Color available is white, translucent, red oxide and black
The specification of most standard silicone sheet we produce are as below:
Density:1.25 g/cm3
Handness:55-60 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C
Width:1m,1.2m,1.5m,1.8m,2.0m, thinkness from 0.1mm to 10mm
The above is silicone rubber sheet standard at Shore A Hardness 40 to 60. Other sizes, colours and hardnesses are available on request.
Besides standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.

Solar laminator special silicon sheet

The Fifth Generation
 
The Second Generation
 

     Fullchance uses qualified raw material of a world-famous brand for the high tear-resistant silicon rubber sheet and carries out technical cooperation with professional companies domestically and abroad. Fullchance adopts advanced techniques and special equipment, large drum-type vulcanization unit, in the development of the product, which has a high level of stability, a good evenness and reliability. Specially used for solar energy laminator, etc. According to specific working conditions and lose-efficacy forms of solar laminated sheet, Second generation silicone rubber sheet,based on the former silicone rubber sheet, this one brings in the green environmentalreinforcing material which is acid resistant, chemical resistant, high temperature resistant,so the tensile strength, tearing strength, and dimensional stability of the silicone rubber sheet are greatly improved, then the lifetime is longer. The advantage of the silicone rubber sheet is that even if it is used to the extreme, the solar module will not be damaged.

    The third generation silicone rubber sheet has great improvement on the chemical resistant andageing resistant property, especially on the high resistance to the EVA volatile matter, then the lifetime can be longer.

    Recently, fifth generation of laminating machine for sealing plastic sheet - fluoride silica gel plate was developed. The new silica gel plates in the original high temperature, low modulus, elastic deformation, elastic recovery, good, based on silica gel plate to overcome the past intolerance acidic media (especially volatile EVA), after some time made use of hard, brittle hair fatal weakness. Because of its inert surface, it has good stain resistance, easy cleaning, so it has better performance and longer service life (three times)


Model

First generation 

Second generation

Third  generation

Fifth generation

Hardness(Shore A)

68±2

70±2

70±3

 

76±2

(working surface)

62±2

(buffering surface)

 

Tensile strength Mpa ≥

9.5

12.5

15

10.2

Tearing strength N/mm ≥

42

48

40

45

Long run temperature℃

230

250

170

250

Resistant to EVA (compare)

Weak

Middle

Strong

Super

Normal using life (times)

>1500

>2500

>3500

>5000

Appearance and color

Transparent,One side

  smooth

One side cloth grain /Two 

sides smooth

Black color/grey color, 

 two sides smooth

Black color, One side

 smooth

One side cloth grain/two 

sides smooth

Black - Grey

Remarks

1.      Other colors can be customized

2.     The maximum width can be 3800mm without joint.


General silicone vacuum bags

Special silicon sheet glass industry according to the market demand is our company specially for glass vacuum nip glue furnace supporting key components.
Glass vacuum nip glue furnace is adopted vacuum principle, make vitreous under vacuum conditions, using atmospheric pressure to heat the glass vacuum bag pressure to eliminate air and unable to have a bubble, vacuum bags on the edge of the vacuum heating conditions, will be two or several pieces of glass and EVA (or other film) thermal bonding together of the special equipment.
Vacuum bag is glass vacuum nip glue furnace, he has the core component, two pieces of silicon sheet and abnormity silica gel sealers composition, silicon sheet is whole sets of laminated furnace, the quality of key components in a direct influence on the glass product quality.

Model

Tensile strength

(Mpa)

Tear strength

(N/mm)

hardness

(Tsou A)

Break elongation(%)

color

form

FC3111

6.5

26

55±5

450

transparent

double-ray

FC3112

6.5

26

55±5

450

transparent

A light a cloth grain

FC3121

6.5

26

55±5

450

rust

double-ray

FC3122

6.5

26

55+5

450

rust

A light a cloth grain

FC3211

8.0

32

55±5

650

ransparent

double-ray

FC3212

8.0

32

55±5

650

ransparent

A light a cloth grain

FC3221

8.0

32

55±5

650

rust

double-ray

FC3222

8.0

32

55±5

650

rust

A light a cloth grain


Silicon sheet for vacuum film machine

FC2111- Common Grade Transparent Silicone Membrane
 
FC2211-High Tearing Resistance Gray Transparent Silicone Membrane
 

Vacuum film machine use silicon sheet is our company according to the market need for vacuum pipelines laminating machine specially designed the complete production.
vacuum film machine use silicon sheet is vacuum membrane machine key components, it will have a direct impact on the skin effect and to the use of laminating machine costs.
Our company produces the vacuum film machine silicon sheet is, use Germany imports of raw materials, coupled with superb production technology and advanced technology and equipment, the product has high temperature resistant, strong toughness, ageing resistance, corrosion resistance, high elastic, avirulent insipidity non-polluting, and surface inert not contamination, is vacuum film machine most ideal elastic offset.
 

Common specifications: 2*1350*2750, 3*1600*3000, special specifications can be ordered.


Specific performance parameters are as follows:

Model

Tensile strength

(Mpa)

Tear strength

(N/mm)

Hardness

(Tsou A)

Break elongation(%)

Color

Form

FC2111

6.5

26

60~75

450

White and transparent

 

Double-ray

 

FC2211

90

32

50~70

650

Gray transparent

 

Double-ray

 

As a China-based glass industry silicone rubber sheet manufacturer and supplier, Fullchance also offers EPDM rubber sheet, silicone extrusion profile, neoprene rubber sheet, Viton rubber sheet, coextrusion door seal rubber extrusion, and PVC edge trim seal, among others.



Silicone Bag: Silicone Vacuum Bags for Glass Laminate(EVA Laminate Machine&PVB Autoclave)

 

Silicone Sheet: Silicone Rubber Sheet for Solar Cell Panel Laminate Encapsulation

 

Silicone Sheet: Silicone Sheet for Wood Door Vacuum Laminating Machine Pressing Machine


sales@fullchance.com
fullchnce@fullchance.com
Skype: fullchance100
+86-15818643223

HOME