Rubber Sheeting Roll

Pulley Lagging Rubber Sheets
Updated:3/14/2013 8:40:04 AM Browse:1135 Close window Print this page

Lagging is the term used to describe the application of a coating, cover or wearing surface which is sometimes applied to pulley shells. Lagging is often applied in order to extend the life of the shell by providing a replaceable wearing surface or to improve the friction between the belt and the pulley. Notably drive pulleys.

Pulley lagging rubber sheets are used to eliminate belt slippage, increase pulley life, improve water shedding and boost productivity.

Pulley Lagging Rubber Sheets


Gutter less design for cleaner compatibility reduces belt vibration and cleaner chatter for standard
applications with minimal slippage.


To help eliminate slippage, increase pulley life and to improve production.

Finish Type

Square and diamond design pulley lagging sheet

Standard Thickness

6 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches



Technical Specification:

  Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 °C


ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 ---

ABE 55120 PL

1.25 55 60 350 280 -25 to +70

ABE 60120 PL

1.25 60 70 350 150 -25 to +70

Technical Diagram

Pulley Lagging Diamond Design
Pulley Lagging Square Design
  • Custom width and length is available on request
  • Custom colours available on request