Rubber Sheeting Roll

Portable Water Rubber Sheet
Updated:3/12/2013 4:04:27 PM Browse:74 Close window Print this page

FULLCHANCE PWS is a high performance and low specific gravity (1.13) EPDM rubber compound which can be applied for water fitting (supplying) parts e.g., lining, joining, gaskets, membranes, cisterns, O-rings, washers that are used in contact with drinking water.

Water intended for human consumption without imparting any toxic effect is drinking water. Water of sufficient quality to serve as drinking water is termed as potable water whether it is used as such or not. The non-metallic materials can cause changes in water quality when it comes in contact with it. BS 6920 and its modified version AS/NZS 4020:2002 (for Australian and New Zealand requirements) is the method for testing the water quality –i.e, ‘Testing of products for use in contact with drinking water’ and any non-metallic product should comply with these test requirements for getting the approval given by Water Quality Centre(WQC). Fullchance PWS has been developed for using in contact with drinking water which has been met all the technical and biological property requirements as tested by following the corresponding Standards.

 

POTABLE RUBBER SHEETS - COMMERCIAL GRADE

Code

Specific
Gravity

Hardness
(±5)

Tensile
Strength

Elongation
at break

Compression Set 
at 70°C for 22 hrs

Temp.
Range

Colour

gm / cm3

Shore A

(min) 
kg / cm2

(min)
%

%

°C

EP70115

1.13

70

115

350

-

-30 to +130

Black

 

Standard Length

10 Mtr

33 Ft

11 Yard

Standard Width

1.2/1.4/1.5 Mtr

4/4.6/4.92 Ft

1.33/1.53/1.64 Yard

 

Note

1). One side or both side smooth or fabric finish can be supplied.

2). Specifications are subject to change without notice.