Viton® Rubber Gaskets


Viton
®Rubber Gaskets

Used in fuel system seals and hoses, O-rings, shaft seals, expansion joints and gaskets in caustic environments.

Viton gaskets also known as FKM gaskets, are produced from a high quality rubber material made from Viton.  Viton rubber gaskets are extremely durable and are well suited to put up with the rigors of caustic environments and fluid exchange devices. Viton rubber gaskets extends the thermal resistance of most mid-performance elastomers. SEND US YOUR DRAWINGS TODAY!!!

Viton® Rubber Gasket Specs:

 

VITON® GASKET

BASIC PARAMETERS FOR FABRICATED VITON® RUBBER GASKETS

Average Cut Tolerances Rubber Gaskets
± .015" Length, Width, OD & ID


Rubber Material Distortions
Shrinkage or Swelling of ± 2%
Below 30° F or Above 110° F
 

Cut Edges
May have slight bevel on edge cross section


Round Hole Diameters
Measured on both X & Y axis stated as a single average, based on drawing tolerance.
 

Concentricity
All rubber gaskets are made with concentric and/ or square tools, non-concentricity may be a result of material distortion.
 

Concavity
Hour Glass Cross Section may occur for parts that are thicker than .125"

 

Other sizes, thickness and Viton Rubber Gaskets are available for the Viton Gasketing material.  Please Call +86-755-27749405 or email us your inquiry.
Viton® Rubber gaskets

Return Policy